Advertisement
Table of Contents
Firepower 8000 Series Devices
•
•
•
•
•
The AMP models have many of the same form factors as their Firepower counterparts, but have been
Note
optimized to take advantage of the Firepower System's network-based advanced malware protection
(AMP) capabilities.
See the following sections for more information:
•
•
•
•
Firepower 8000 Series Chassis Front View
The Firepower 8000 Series chassis can be in the AMP8x50, 81xx Family, the 82xx Family, or the 83xx
Family. See the Regulatory Compliance and Safety Information for FirePOWER and FireSIGHT
Appliances document for safety considerations for AMP8x50, 81xx Family, 82xx Family, and 83xx
Family appliances.
AMP8x50 and Firepower 81xx Family Chassis Front View
The front view of the chassis contains the LCD panel, front panel, and three module slots.
Figure 2-1
Firepower 8000 Series Hardware Installation Guide
2-2
Firepower 8290, part of the 82xx Family, is an 8U configuration with four 2U chassis. The primary
chassis contains three stacking modules and up to four sensing modules. Each secondary chassis
contains one stacking module. This model is fully configured and does not accept a stacking kit.
Firepower 8350 and AMP8350, part of the 83xx Family, is a 2U chassis and can contain up to seven
modules. You can add up to three stacking kits for a total 8U configuration.
Firepower 8360 and AMP8360, part of the 83xx Family, is a 4U configuration with two 2U chassis.
The primary chassis contains one stacking module and up to six sensing modules. The secondary
chassis contains one stacking module. You can add up to two stacking kits for a total 8U
configuration.
Firepower 8370 and AMP8370, part of the 83xx Family, is a 6U configuration with three 2U chassis.
The primary chassis contains two stacking modules and up to five sensing modules. Each secondary
chassis contains one stacking module. You can add one stacking kit for a total 8U configuration.
Firepower 8390 and AMP8390, part of the 83xx Family, is an 8U configuration with four 2U
chassis. The primary chassis contains three stacking modules and up to four sensing modules. Each
secondary chassis contains one stacking module. This model is fully configured and does not accept
a stacking kit.
Firepower 8000 Series Chassis Front View, page 2-2
Firepower 8000 Series Chassis Rear View, page 2-6
Firepower 8000 Series Physical and Environmental Parameters, page 2-9
Firepower 8000 Series Modules, page 2-12
AMP8x50 and Firepower 81xx Family (Chassis: CHAS-1U-AC/DC) Front View
Chapter 2
Hardware Specifications
Advertisement
Table of Contents
