Error Alert Mode - Cisco AMP8050 Hardware Installation

Chapter 4 Using the LCD Panel on a Firepower Device
Information
Press the right arrow ( ) key on the bottom row to access Information mode.
Step 3
Scroll through the options by pressing the down arrow (â) key. Press the right arrow key in the row next
Step 4
to the information you want to view.
Depending on the option you chose, the LCD panel displays the information listed in
page

Error Alert Mode

When a hardware error or fault condition occurs, Error Alert mode interrupts Idle Display mode. In Error
Alert mode, the LCD display flashes and displays one or more of the errors listed in the following table.
Table 4-4
Error
Hardware alarm
Link state propagation
Bypass
Fan status
When a hardware error alert occurs, the LCD displays the main hardware alert menu, as follows:
HARDWARE ERROR!
Exit
You can use the multi-function keys to scroll through the list of error alerts or exit Error Alert mode.
Note that the LCD display continues to flash and display an alert message until all error conditions are
resolved.
The LCD panel always displays the platform daemon error message first, followed by a list of other
hardware error messages. The following table provides basic information on Firepower device error
messages, where
Table 4-5 Hardware Alarm Error Messages
Error Message
NFE_platformdX
NFE_tempX
HeartBeatX
fragX
rulesX
TCAMX
4-8.
LCD Panel Error Alerts
indicates the NFE accelerator card (
X
Condition Monitored
platform daemon
temperature status
heartbeat
(host frag)
nfe_ipfragd
daemon
(host rules) daemon Alerts when the
Rulesd
TCAM daemon
Description
Alerts on hardware alarms
Displays the link state of paired interfaces
Displays the status of inline sets configured in bypass mode
Alerts when a fan reaches a critical condition
or
0
Description
Alerts when the platform daemon fails.
Alerts when the temperature of the accelerator card exceeds
acceptable limits:
• : greater than 97°C/206°F
WARNING
• : greater than 102°C/215°F
CRITICAL
Alerts when the system cannot detect the heartbeat.
Alerts when the
ipfragd
Rulesd
Alerts when the daemon fails.
TCAM
Firepower 8000 Series Hardware Installation Guide
) that generated the alert.
1
daemon fails.
daemon fails.
Error Alert Mode
Table 4-3 on
4-9