Appendix C
Installing a Malware Storage Pack
Align the malware storage pack with the SSD bay and insert the malware storage pack into the appliance.
Step 7
Push the latch handle on the SSD tray to secure the malware storage pack into the appliance.
Step 8
Use the 3 mm hex wrench to lock the latch release on the malware storage pack by turning the hex screw
Step 9
one quarter turn clockwise, towards the lock icon (
Turn on the system.
Step 10
Refer to <Blue>Post Installation on page 11 for information on restarting a device after a malware
storage pack has been installed.
Post Installation
After installation of a malware storage pack is completed, you can restart the device to resume normal
operation.
For information on how to safely restart or shut down the device, see the Managing Devices chapter in
Note
the Firepower Management Center Configuration Guide.
).
Firepower 8000 Series Hardware Installation Guide
Post Installation
C-11