Cisco AMP8050 Hardware Installation page 129

Appendix C Installing a Malware Storage Pack
Figure C-5
The following steps describe how to install a malware storage pack in the 82xx Family and the 83xx
Family of devices. Install the malware storage pack in the SSD bay labeled Malware Storage Pack.
Remove the empty SSD tray and replace it with the appropriate malware storage pack.
Use proper electrostatic discharge (ESD) practices such as wrist straps and an ESD work surface.
Note
Ensure the device is powered off before you begin to install or remove a malware storage pack.
Step 1
Use the 3 mm hex wrench to unlock the latch release on the bottom SSD tray by turning the hex screw
Step 2
one quarter turn counter-clockwise, towards the unlock icon (
Press the latch lock to release the latch handle.
Step 3
The latch handle opens toward you.
SSD Detail
).
Firepower 8000 Series Hardware Installation Guide
Installation
C-9