Table of Contents
Advertisement
Insert the Module or Slot Cover
Do not use excessive force. If the latch does not engage, remove and realign the module, then try again.
Caution
Press firmly on the screw hole to push the lever fully against the module to secure the latch.
Step 5
The lever is fully against the module, and the module is flush with the chassis.
Step 6
Insert and tighten the reserved T8 Torx screw into the lever.
Firepower 8000 Series Hardware Installation Guide
B-8
Appendix B
Inserting and Removing Firepower 8000 Series Network Modules
Advertisement
Table of Contents
