Power-Up Led Sequence; Table 12: Normal Power-Up Led Sequence - Belair 100SN Installation Manual

BelAir100SN Installation Guide
Power-up LED
Sequence
May 18, 2010
Table 11: LED Indicator Description - BelAir100SN (Continued)
LED Colour
Radio or Off
Mesh
Amber
Flashing
Amber
Flashing
Green
Green
Table 12 shows the normal power-up LED sequence.

Table 12: Normal Power-Up LED Sequence

Power-up Sequence
Off
On
After 1 minute
After 2 minutes
After 2+ minutes
After 7 minutes (maximum)
Note: For all nodes except the BelAir100SN, light is either off or flashing green
if data is transferred across the Ethernet link.
Confidential
Document Number BDTK11001-A01 Preliminary
State Description
Hardware Hardware failure, no power to the
failure unit or radio initialization
Not All of the P-to-P and P-to-MP links
operational are down.
P-to-P and/or One or more, but not all, of the
P-to-MP link P-to-P and/or P-to-MP links are
failure down.
MP-to-MP link One or more of the MP-to-MP links
failure are down.
Operational All links are operational.
Power
Off
Amber
Green
Green
Green
Green
Troubleshooting
Cable
Radio/Mesh
Modem/
Ethernet
Off Off
Off Off
Off Amber
Green
1
Off
Green
Flashing Blue
Blue Green
Page 57 of 75