Required Tools - Belair 100SN Installation Manual

BelAir100SN Installation Guide

Required Tools

May 18, 2010
The following list outlines the basic tools that are required to install a
BelAir100SN. Additional tools may be required, depending on the intended
point of installation.
• 5/8-inch (16 mm) wrench to fasten cable clamps onto supporting wire
• 5/16-inch (8 mm) wrench to attach antenna assemblies to the unit and to
adjust antenna orientation
• no. 2 Phillips screwdriver
• cable ties (recommended for cable dressing)
• one of the following thread-lockers:
—Loctite® QuickStix™ 268™ Threadlocker, High Strength, or equivalent
—Loctite® QuickStix™ 248™ Threadlocker, Medium Strength, or
equivalent
• self-amalgamating tape
• additional tools as appropriate to your specific installation environment
Confidential
Document Number BDTK11001-A01 Preliminary
Before You Install the BelAir100SN
Page 28 of 75