Figure 24: Sliding The Security Bracket Into Position; Figure 25: Inserting The Shoulder Screws - Belair 100SN Installation Manual

BelAir100SN Installation Guide
May 18, 2010
7 Slide the security bracket down into locked position and return to the open
position. Figure 24
holes in the two brackets can be aligned to use a paddle lock to secure the
BelAir100SN to the brackets.

Figure 24: Sliding the Security Bracket into Position

8 Insert the four black shoulder screws (BMDG10072) found in the install kit
into the back of the BelAir100SN. See
Note: Ensure you use the black shoulder screws (BMDG10072). Using the
wrong shoulder screws may permanently damage the BelAir100SN
casing making it unmountable.

Figure 25: Inserting the Shoulder Screws

Insert black shoulder screws here.
Confidential
Document Number BDTK11001-A01 Preliminary
Pedestal Installation of the BelAir100SN
shows the security bracket in the locked position. The
Figure 25.
Page 48 of 75