General Rf Safety Guidelines - Belair 100SN Installation Manual

BelAir100SN Installation Guide
General RF Safety
Guidelines
May 18, 2010
Warning — Mount Right Side Up Only
This document describes mounting the unit in certain
orientations that avoid the collection of rain water in the unit.
Never mount the unit such that its connector field is facing
upwards or in any orientation that allows rain water to enter
the unit. Mounting the unit such that its connector field is
facing upwards, or in any orientation not described in this
document, voids BelAir's product warranty. Any product
damage caused by improperly mounting the unit will not be
covered under BelAir's product warranty.
BelAir100SN Servicing
The BelAir100SN contains no user serviceable parts.
The BelAir100SN contains no field-serviceable parts nor any external
adjustable mechanisms. The BelAir100SN should only be serviced in a
manufacturing or service depot site approved by BelAir Networks or its
authorized agents.
Unauthorized servicing of the BelAir100SN voids the product warranty. BelAir
Networks is not liable for any damage or harm from the unauthorized servicing
of this product.
Warning — Explosive Device Proximity
Do not install the BelAir unit in any areas where blasting
(blasting caps, radio controlled equipment) or explosive gases
may be present.
Confidential
Document Number BDTK11001-A01 Preliminary
Before You Install the BelAir100SN
Page 25 of 75