BelAir100SN Installation Guide
Figure 15: BelAir100SN Connector Fields
GRS
Connector
Step 2—Attach
Antennas As Required
May 18, 2010
Strand mounting the BelAir100SN with Directional Antennas
protective cover now. Otherwise, ensure that the protective cover is
secure.
Right Side View
The directional 5 GHz backhaul antenna is oriented vertically while the
directional 2.4 GHz access antenna is oriented horizontally. The directional
5 GHz antenna has one cable while the directional 2.4 GHz antenna has two
cables. See
Figure 7 on page
Directional antennas, both backhaul and access, are ordered and shipped
separately from your unit.
Directional antennas can be mounted at the four corners of the BelAir100SN.
Each location can accept either a directional access antenna or a directional
backhaul antenna. Refer to
rotated 90 degrees horizontally.
Note: The size of the GRS connector in the rear left corner of the unit may
prevent full rotation of a directional backhaul antenna mounted at that
Document Number BDTK11001-A01 Preliminary
Strand Cable
Clamp
Strand Mount
Bracket
Antenna
Connectors
Ethernet
Connector
17.
Figure 8 on page
Confidential
Left Side View
18. As well each antenna can be
Page 37 of 75