Figure 29: Typical Coaxial Cable Terminator With Male Ks Interface - Belair 100SN Installation Manual

BelAir100SN Installation Guide
May 18, 2010

Figure 29: Typical Coaxial Cable Terminator with Male KS Interface

4 Energize the electrical circuit that the unit is connected to.
5 LEDs in the connector field of the unit will illuminate, indicating that the unit
has begun operating. If the LEDs do not turn on, see
page 60.
The BelAir100SN unit is now installed. Refer to
Units" on page 53 and the
deployment of your BelAir100SN.
Confidential
Document Number BDTK11001-A01 Preliminary
Pedestal Installation of the BelAir100SN
"Commissioning BelAir100SN
BelAir100SN User Guide
"Technical Support" on
to complete the
Page 52 of 75