Figure 27: Female-To-Female Bulkhead Adaptor; Figure 28: Possible Mounting Holes For Female-To-Female Bulkhead Adaptor - Belair 100SN Installation Manual

BelAir100SN Installation Guide
May 18, 2010

Figure 27: Female-to-female Bulkhead Adaptor

Retaining Nut
Lock Washer
2 Mount the female-to-female bulkhead adaptor onto the BelAir Pedestal
Mounting Bracket. See
adaptor with the threading for the antenna up. Use the retaining nut and
lock washer from step

Figure 28: Possible Mounting Holes for female-to-female Bulkhead Adaptor

3 Attach an omni-directional antenna onto the female-to-female bulkhead
adaptor. Ensure there exists at least 1/2 inch of clearance from the top of
the antenna to the top of the U-bracket.
4 Repeat step 1 to step
Confidential
Document Number BDTK11001-A01 Preliminary
Pedestal Installation of the BelAir100SN
Figure 28. Make sure you mount the end of the
1 to secure the bulkhead adaptor.
3 for the other omni-directional antenna.
Possible
Adaptor
Locations
Page 50 of 75