Figure 7: Horizontal And Vertical Directional Antennas - Belair 100SN Installation Manual

BelAir100SN Installation Guide
May 18, 2010

Figure 7: Horizontal and Vertical Directional Antennas

Vertical backhaul antenna
with bracket arm and
retaining screws
Directional antennas can be mounted at the four corners of the BelAir100SN.
Each location can accept either a directional access antenna or a directional
backhaul antenna. Refer to
rotated 90 degrees horizontally.
Note: The size of the GRS connector in the rear left corner of the unit may
prevent full rotation of a directional backhaul antenna mounted at that
location. If this is an issue, try mounting the backhaul antenna in
another corner of the unit.
Confidential
Document Number BDTK11001-A01 Preliminary
Infrastructure Requirements for the BelAir100SN
Horizontal access antenna
with bracket arm and
retaining screws
Figure 8 on page 18. As well each antenna can be
Page 17 of 75