Figure 11: Attaching Antenna Bracket To Belair100Sn; Figure 12: Rotating A Mounted Omni-Directional Antenna - Belair 100SN Installation Manual

BelAir100SN Installation Guide
May 18, 2010
Strand mounting the BelAir100SN with Omni-directional Antennas
and washers. Tighten the screws loosely so you can adjust the bracket
afterwards.

Figure 11: Attaching Antenna Bracket to BelAir100SN

2 Using a 5/16 inch (8 mm) wrench, loosen the antenna retaining bolt and the
pivot bolt. See Figure
vertical with respect to the street level surface. See

Figure 12: Rotating a Mounted Omni-directional Antenna

Confidential
Document Number BDTK11001-A01 Preliminary
Antenna bracket
mounting screws
12. Swing the omni-directional antenna down until it is
Antenna Rotation
direction
Figure 13 on page
Antenna cable
Folded antenna
Pivot bolt
Retaining bolt
Antenna bracket
Page 31 of 75
32.