Step 2-Prepare Your Network Servers To Use Belair Auto-Con; Figuration; Step 3-Physically Install The Units; Step 4-Commission The Units - Belair 100SN Installation Manual

BelAir100SN Installation Guide
Step 2—Prepare your
Network Servers to use
BelAir
Auto-configuration
Step 3—Physically Install
the Units
Step 4—Commission
the Units
Step 5—Perform
Acceptance Tests
Minimum
Required
Information
May 18, 2010
2 Basic Network and Node Planning. This task builds on the RF plan and site
survey. It determines necessary software settings.
With auto-configuration, the BelAir100SN can automatically obtain a script file
from a server on your network after it powers up. The unit then configures
itself based on the content of the file.
BelAir Networks' auto-configuration capabilities and requirements are fully
BelAir100SN User Guide
described in the
Once your network servers have been configured to use BelAir
auto-configuration, you can proceed to physically install the units.
Installation Guides
Refer to the
Once the units are installed, you should verify that the radio module
performance meets the goals of the RF plan. Field installation considerations
may mean adjusting some settings.
Installation Guides
Refer to the
User Guides
Refer to the
Once the units are operational, you should perform a post-installation site
survey and acceptance tests. These tests generate a base line description of the
expected behavior and performance of the network. Such a description helps
you troubleshoot of any potential future issues.
Contact your BelAir Networks representative for guidelines on performing
acceptance tests.
The minimum set of information required to configure a BelAir unit depends on
the type of radio in your units and the type of network being deployed.
lists the minimum required information and the conditions they are required.

Table 7: Minimum Required Information

Node Settings
Setting
Country of operation
New root password for each node Always
Confidential
Document Number BDTK11001-A01 Preliminary
Before You Install the BelAir100SN
.
for each BelAir node to install your units.
for each BelAir node to commission your units.
for each BelAir node to adjust your units as required.
Required when...
Always
Table 7
Page 22 of 75