Troubleshooting; Table 11: Led Indicator Description - Belair100Sn - Belair 100SN Installation Manual

BelAir100SN Installation Guide

Troubleshooting

May 18, 2010
The unit has three external LEDs as described

Table 11: LED Indicator Description - BelAir100SN

LED Colour
Power Off
Amber
Flashing
Green
Green
Red
Confidential
Document Number BDTK11001-A01 Preliminary
State Description
Off No power to the unit. Check power
cable connection and power source.
If the voltage is low, 45 VAC or less,
check the cable connection between
the BelAir100SN and the power tap.
You may need to use a solid 0.5-inch
cable rather than a lossy 75-ohm
cable.
Initialization The unit is initializing.
Autoconfiguring The unit is downloading
autoconfiguration data.
Operational Self-test passed and
autoconfiguration completed (if
applicable)
Not Self-test failed.
operational Restart the unit.
Troubleshooting
inTable 11.
Page 55 of 75