Installation Safety Information; Documentation Safety Notification Conventions - Belair 100SN Installation Manual

BelAir100SN Installation Guide
Installation Safety
Information
Documentation Safety
Notification
Conventions
May 18, 2010
Table 7: Minimum Required Information (Continued)
IP address and subnet mask for
each node
Wi-Fi Radio Settings
Setting
Channel numbers
Antenna gain
SSIDs, mesh or link identifiers
Wi-Fi Backhaul Topology Settings
Backhaul topology
(multipoint-to-multipoint,
point-to-multipoint or
point-to-point)
Star topology settings
• unit role (base station or
subscriber station)
When installing the BelAir100SN, and to ensure its safe operation, follow all
the guidelines in this manual as well as all applicable local, regional and national
building and electrical safety codes.
The following conventions are used in this document.
Caution
This symbol indicates that care must be taken. Failure to
follow directions carefully could result in damage to
equipment or loss of data.
Confidential
Document Number BDTK11001-A01 Preliminary
Before You Install the BelAir100SN
Always
Required when...
Always
Always
Always
Always
Radio is part of a point-to-multipoint
deployment
Page 23 of 75