Table of Contents
Advertisement
BelAir100SN Installation Guide
May 18, 2010
Strand mounting the BelAir100SN with Omni-directional Antennas
Figure 14: Typical Coaxial Cable Terminator with Male KS Interface
4 Energize the electrical circuit that the unit is connected to.
5 LEDs in the connector field of the unit will illuminate, indicating that the unit
has begun operating. If the LEDs do not turn on, see
page
60.
The BelAir100SN unit is now installed. Refer to
Units" on page 53
and the
deployment of your BelAir100SN.
Confidential
Document Number BDTK11001-A01 Preliminary
"Commissioning BelAir100SN
BelAir100SN User Guide
"Technical Support" on
to complete the
Page 35 of 75
Advertisement
Chapters
Table of Contents
Troubleshooting
