Setting The Dscp Value For Packets Sent By The Stelnet Client - HP 10500 Series Configuration Manual

Task
Establish a connection
to an Stelnet server.

Setting the DSCP value for packets sent by the Stelnet client

Step
1. Enter system view.
2. Set the
packets sent by the Stelnet
client.
NOTE:
This feature is available in Release 1203 and later versions.
Command
•
Establish a connection to an IPv4 server:
In non-FIPS mode:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 | des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key rsa |
prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex
dh-group14 | prefer-stoc-cipher { aes128 |
aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] *
•
Establish a connection to an IPv6 server:
In non-FIPS mode:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 | des } |
prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key rsa |
prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex
dh-group14 | prefer-stoc-cipher { aes128 |
aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] *
Command
system-view
•
DSCP value for
•
Set the DSCP value for IPv4
packets sent by the Stelnet
client:
ssh client dscp dscp-value
Set the DSCP value for IPv6
packets sent by the Stelnet
client:
ssh client ipv6 dscp dscp-value
211
Remarks
Use one of the
commands in user view.
Remarks
N/A
Optional.
By default, the DSCP value is 16 in
IPv4 packets sent by the Stelnet
client and is 0 in IPv6 packets sent
by the Stelnet client.