HP 10500 Series Configuration Manual page 41

Step
2. Enable the trap function for
RADIUS.
Enabling the RADIUS client service
To receive and send RADIUS packets, enable the RADIUS client service on the device. If RADIUS is not
required, disable the RADIUS client service to avoid attacks that exploit RADIUS packets.
To enable the RADIUS client service:
Step
1. Enter system view.
2. Enable the RADIUS client
service.
Setting the DSCP value for RADIUS packets
This feature is available in Release 1203 and later versions.
To set the DSCP value for RADIUS packets:
Step
1. Enter system view.
2. Set the DSCP value for IPv4
RADIUS packets.
3. Set the DSCP value for IPv6
RADIUS packets.
Displaying and maintaining RADIUS
Task
Display the configuration information
of RADIUS schemes. (In standalone
mode.)
Display the configuration information
of RADIUS schemes. (In IRF mode.)
Display the RADIUS packet statistics. (In
standalone mode.)
Display the RADIUS packet statistics. (In
IRF mode.)
Command
radius trap
{ accounting-server-down |
authentication-error-threshold |
authentication-server-down }
Command
system-view
radius client enable
Command
system-view
radius dscp dscp-value
radius ipv6 dscp dscp-value
Command
display radius scheme [ radius-scheme-name ]
[ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
display radius scheme [ radius-scheme-name ]
[ chassis chassis-number slot slot-number ] [ |
{ begin | exclude | include }
regular-expression ]
display radius statistics [ slot slot-number ] [ |
{ begin | exclude | include }
regular-expression ]
display radius statistics [ chassis chassis-number
slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
31
Remarks
Disabled by default.
Remarks
N/A
Optional.
Enabled by default.
Remarks
N/A
Optional.
The default DSCP value is 0.
Optional.
The default DSCP value is 0.
Remarks
Available in any
view.
Available in any
view.
Available in any
view.
Available in user
view.