HP 10500 Series Configuration Manual page 72

Figure 27 Adding a charging plan
# Add a service.
Click the Service tab, and select User Access Manager > Service Configuration from the navigation
tree. Then, click Add to configure a service as follows:
a. Add a service named Dot1x auth, and set the service suffix to bbb, the authentication domain
for the 802.1X user. With the service suffix configured, you must configure the access device
to send usernames that carry domain names to the RADIUS server.
b. Select UserAcct as the charging plan.
c. Select Deploy VLAN and set the ID of the VLAN to be assigned to 4.
d. Configure other parameters as required.
e. Click OK.
62