Password Control Configuration Example - HP 10500 Series Configuration Manual

Task
Display information about users in
the password control blacklist.
Delete users from the password
control blacklist.
Clear history password records.

Password control configuration example

Network requirements
Implement the following global password control policy:
An FTP or VTY user failing to provide the correct password in two successive login attempts is
•
permanently prohibited from logging in.
A user can log in five times within 60 days after the password expires.
•
The password aging time is 30 days.
•
• The minimum password update interval is 36 hours.
The maximum account idle time is 30 days.
•
A password cannot contain the username or the reverse of the username.
•
No character occurs consecutively three or more times in a password.
•
Implement the following super password control policy:
A super password must contain at least three types of valid characters, five or more of each type.
Implement the following password control policy for local Telnet user test:
The password must contain at least 12 characters.
•
The password must consist of at least two types of valid characters, five or more of each type.
•
• The password aging time is 20 days.
Configuration procedure
# Enable the password control feature globally.
<Sysname> system-view
[Sysname] password-control enable
# Prohibit the user from logging in forever after two successive login failures.
[Sysname] password-control login-attempt 2 exceed lock
# Set the password aging time to 30 days for all passwords.
[Sysname] password-control aging 30
# Set the minimum password update interval to 36 hours.
[Sysname] password-control password update interval 36
Command
display password-control blacklist
[ user-name name | ip
ipv4-address | ipv6 ipv6-address ]
[ | { begin | exclude | include }
regular-expression ]
reset password-control blacklist
[ all | user-name name ]
reset password-control
history-record [ user-name name |
super [ level level ] ]
292
Remarks
Available in any view.
Available in user view.
Available in user view.
This command can delete the
history password records of one or
all users even when the password
history function is disabled.