HP 10500 Series Configuration Manual page 68

Figure 23 Device list
On the port group configuration page, click Add to configure a port group as follows:
a. Enter the port group name.
b. Select the configured IP address group. The IP address used by the user to access the network
must be within this IP address group.
c. Leave the default settings for other parameters and click OK.
Figure 24 Port group configuration
# Select User Access Manager > Service Parameters > Validate System Configuration from the
navigation tree to validate the configurations.
4. Configure the switch:
a. Configure a RADIUS scheme:
# Create a RADIUS scheme named rs1 and enter its view.
<Switch> system-view
[Switch] radius scheme rs1
# Set the server type for the RADIUS scheme. When using the IMC server, set the server type
to extended.
58