HP 10500 Series Configuration Manual page 169

Figure 67 Portal server configuration
2. Configure the IP address group:
a. Select User Access Manager > Portal Service Management > IP Group from the navigation tree
to enter the portal IP address group configuration page.
b. Click Add to enter the page shown in
c. Enter the IP group name.
d. Enter the start IP address and end IP address of the IP group. Make sure the host IP address is
in the IP group.
e. Select a service group. By default, the group Ungrouped is used.
f. Select the IP group type Normal.
g. Click OK.
Figure 68 Adding an IP address group
Figure 68.
159