Table of Contents
Advertisement
Using the Remote Interface
NOTE: The Remote Interface is for demo purposes only and
not fully functional.
The Remote User Interface allows you to display and access
the AirCheck G2's user interface from your laptop over a LAN
using VNC. You will need a VNC viewer installed on your PC.
1
Connect the AirCheck G2 via an Ethernet cable to the
same LAN on which your PC is connected.
2
From the
Settings, select Device Settings, then
Remote User Interface.
3
Follow the on-screen instructions, and then, select Apply.
4
Launch a VNC viewer on your PC.
5
Enter the IP address shown in the AirCheck G2 Tester.
When you are done with the remote session, you must turn
your AirCheck G2 Tester off and back on to reset it to normal
operation mode.
Managing Profiles and Sessions on a PC using
AirCheck G2 Manager
The AirCheck G2 Manager online Help contains
more instructions for using the application.
How to: Transfer and view test sessions with AirCheck G2
Manager
1
Ensure the latest version of AirCheck G2 Manager
software is installed on your PC. (Download from
https://app.link-live.com/downloads.)
2
Start the software.
3
Turn on the Tester, and connect it to the PC.
4
In AirCheck G2 Manager, click Session Data on the left
side menu.
5
From the Session Details screen, click the Transfer
button to open the Transfer Sessions dialog box.
Figure 51. Transfer Sessions Button
71
Saving Test Sessions and Managing Files
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the aircheck G2 and is the answer not in the manual?
Questions and answers