Entering Network Security Credentials; How To: Enter Credentials From The Networks Or Access Points List - Netscout aircheck G2 User Manual

3 Select your language from the list of those available.
4 Touch Apply.
The Tester will reboot and then show the selected
language.

Entering Network Security Credentials

There are three methods for entering and saving network
and AP security credentials:
From the Tester's Network or Access Point Details

screen
In the Tester's Settings menu

In AirCheck G2 Manager's Profile Setup menu

How to: Enter credentials from the Networks or Access
Points list
If you select a discovered network or AP from the Networks
or Access Points list, you will not need to enter the SSID.
1 From the Home Screen, touch Networks or Access
Points.
2 Touch the row of the relevant network or AP to open the
details screen.
3 From the network or AP details screen, touch the
Connect button at the bottom of the screen. See
26.
4 If the network or AP is secured, the Configure screen
Figure
opens; enter the password on the configuration screen.
41
Customizing the Tester for your Network
Figure 26. Network Details Screen