Netscout aircheck G2 User Manual page 37

Touch the Sort field to change the order in which clients
are listed. The value by which the list is sorted shows
prominently for each client. For example, if you change
to Sort by 802.11 Type, the Clients list screen displays
the 802.11 type icons next to each client, instead of the
AP it is connected to, as shown in
Sort Order Button: These arrows switch the list

order from ascending to descending, and vice versa.
MAC: The MAC address of the client. The address starts

with a vendor abbreviation prefix, if the prefix is
available.
NOTE: The client name can be either (1) MAC colon
format, e.g., 00:11:22:33:44:55 or (2) OUI compact colon
format, i.e., Vendor:33:44:55. You can set or change the
client display format from
> MAC Address Format.
(Signal Strength): The client's signal strength. The

color of the bars and the numeric value change with the
actual fluctuation of signal strength.
Security status of the AP:

Red open lock: The network does not have security
enabled.
Yellow closed lock: One or more access points use
WEP or Cisco LEAP security protocol. These are less
secure than other protocols.
Figure 13.
Settings > 802.11 Settings
Green closed lock: All access points use security
protocols that are more secure than WEP, for example,
WPA or WPA2.
Refresh: Touch this icon to clear the current

results and restart the scan.
Touching the
unsaved test results.
Save: Touch this button to save a session file

containing all discovered networks, APs, channels,
and clients. The session file will also include all test
results for any saved AutoTests, connection tests,
Ethernet tests, and roaming and range tests.
"Saving Sessions," page 69.
Filter Button: Touch here to filter for specific client

characteristics, such as AP name, security type, or time
since the client was last seen.
NOTE: You can set only one filter at a time. Once a filter is
set, the Clients screen re-opens. The title of the screen
changes to "Clients (X of Y)", such that 
X = the number of clients filtered, and 
Y = the total number of clients discovered.
This icon appears to the right of the active filter.
Touch the icon to remove the filter.
25
Discovering Clients
Caution
Refresh button will erase all
See