Saving Test Sessions And Managing Files; Saving Sessions; How To: Save A Test Session - Netscout aircheck G2 User Manual

S T
XV. AVING EST

Saving Sessions

You can save the information the Tester has collected since
you last turned it on, pressed
AutoTest, disconnected the USB cable, or rebooted the
Tester. The AirCheck G2 Tester saves up to 100 test results.
A session file includes this information:
AutoTest results (if saved when exiting AutoTest)

Discovery information for networks, access points,

associated clients, and channels (does not include
graphs)
Network and AP connection test results including

connection logs
Ethernet test results including DHCP logs


How to: Save a test Session

1 Press Save. The Tester opens the Save Session
screen with a default, sequential filename,
"Session0000.acsx".
2 To edit the default filename, press Filename, and use the
soft keyboard to enter a custom name. When finished,
press DONE.
S M
ESSIONS AND
Refresh, pressed
F
ANAGING ILES
NOTE: Session file names can have a maximum of 32
characters, not including the file extension.
3 On the Save Session screen, touch Add Location to type
in location information.
4 Touch Add Notes to type in additional notes.
5 When finished, touch Apply to save the session file.
To view the saved session, open it in AirCheck G2 Manager.
See "Managing Profiles and Sessions on a PC using
AirCheck G2 Manager," page 71.
69

Saving Test Sessions and Managing Files

Figure 49. Save Session Screen