Viewing Device Information; Troubleshoot: If The Tester Will Not Turn Off - Netscout aircheck G2 User Manual

4 To continue, touch Yes in the Reboot Required pop-up
box.
After the Tester restarts, factory default settings will be
restored.

Viewing Device Information

From the Home Screen, select
Serial Number: The serial number is also shown under

the battery pack.
WLAN MAC: Media Access Control address. The unique

address of the Tester on the WLAN.
Ethernet MAC: The unique address of the Tester on the

wired connection.
Hardware Version: The version number of the Tester's

hardware.
Software Version: The version number of the software

in the Tester.
Total Flash Memory: The total memory on the device.

Free Flash Memory: The amount of memory still

available for saving data on the device.

Troubleshoot: If the Tester Will Not Turn Off

If the Tester will not turn off, hold down the power button for
approximately four seconds to perform a hard shutdown.
Do not press or hold the power button during a
software update. Doing so may corrupt the file
system.
88
Maintenance
Settings, and then, About.
Caution