Table of Contents
Advertisement
C
IX.
OMPANION
These two free services enhance your testing, analysis, and
documentation capabilities with the AirCheck G2 Tester.
Getting Started in Link-Live Cloud Service
This online service, once set up, automatically uploads and
saves AutoTest and Connection test results from the Tester
any time the it is connected to the internet. In the Link-Live
Cloud Service, you can comment on test results, label and
organize your switch and cable set up, monitor data from
multiple testing devices as they come in, and document
completed jobs.
To start, create a user account at Link-Live.com.
Next, you must Claim the Tester to the cloud service.
How to: Claim the AirCheck G2 to Link-Live
1
After creating a user account, sign in to Link-Live Cloud
Service.
2
Once you are signed in, click
the Units drop-down menu
at the upper right.
3
Click Claim, and select the
AirCheck G2 image.
S
ERVICES
4
Follow the on-screen instructions to finish claiming.
5
Click "Listen" in Link-Live before you touch "Claim" on the
Tester.
See "Link-Live Settings," page 84.
Once your AirCheck G2 Tester is claimed in Link-Live, test
results will upload automatically after you have run a test
and successfully connected to the internet. The Link-Live
Upload field on the AutoTest and Connection test results
screens indicates whether the test results were successfully
sent to Link-Live.
Figure 23. Successful Link-Live Upload Field
If no connection is available, the Tester will queue up to 10
tests before overwriting previous results.
You can also configure uploading and notification settings on
the Link-Live Cloud Service web site. For more information
about Link-Live, click Support > Questions at the top right of
the Link-Live web page at Link-Live.com.
38
Companion Services
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the aircheck G2 and is the answer not in the manual?
Questions and answers