Configuration Examples For Vtp; Example: Configuring A Switch As The Primary Server; Example: Configuring Switch As Vtp Server; Example: Enabling Vtp On The Interface - Cisco Catalyst 2960 series Configuration Manual

Vlan
Hide thumbs Also See for Catalyst 2960 series:
Table of Contents

Advertisement

Configuration Examples for VTP

Configuration Examples for VTP

Example: Configuring a Switch as the Primary Server

This example shows how to configure a switch as the primary server for the VLAN database (the default)
when a hidden or secret password was configured:
Switch# vtp primary vlan
Enter VTP password: mypassword
This switch is becoming Primary server for vlan feature in the VTP
VTP Database Conf Switch ID
------------ ---- -------------- -------------- -------- --------------------
VLANDB
Do you want to continue (y/n) [n]? y
Related Topics
Configuring a VTP Version 3 Password, on page 27
Passwords for the VTP Domain, on page 22

Example: Configuring Switch as VTP Server

This example shows how to configure the switch as a VTP server with the domain name eng_group and the
password mypassword:
Switch(config)# vtp domain eng_group
Setting VTP domain name to eng_group.
Switch(config)# vtp mode server
Setting device to VTP Server mode for VLANS.
Switch(config)# vtp password mypassword
Setting device VLAN database password to mypassword.
Switch(config)# end
Related Topics
Configuring VTP Mode, on page 25
VTP Modes, on page 16

Example: Enabling VTP on the Interface

To enable VTP on the interface, use the vtp interface configuration command. To disable VTP on the interface,
use the no vtp interface configuration command.
Switch(config)# interface gigabitethernet 1/0/1
Switch(config-if)# vtp
Switch(config-if)# end
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
36
Primary Server Revision System Name
Yes
00d0.00b8.1400=00d0.00b8.1400 1
Configuring VTP
domain
stp7
OL-29065

Advertisement

Table of Contents
loading

Table of Contents