Table of Contents
Advertisement
2.3 Installation Procedures
Warning:
Caution:
2.4 Ethernet connector (CN2) (PCM-3347F/3348F)
The PCM-3347F is equipped with a high performance 32-bit PCI-bus
Fast Ethernet interface which is fully compliant with IEEE 802.3u 100/
10Base-T specifications. It is supported by all major network operating
systems.
The medium type can be configured via the RSet8139.EXE program
included on the utility disk. (See Chapter 5 for detailed information.)
2.4.1 Ethernet connector (CN2)
10/100Base-T connects to the PCM-3347F and PCM-3348 via an adapter
cable to the 10-pin 2 mm connector.
2.5 LCD-A display connector (CN7)
CN7 is a 40-pin dual-in-line header and is used to connect an LCD dis-
play to the PCM-3347F.
PCM-3347 User's Manual
Always completely disconnect the power cord
from your board whenever you are working on it.
Do not make connections while the power is on,
because sensitive electronic components can be
damaged by a sudden rush of power.
Always ground yourself to remove any static
charge before touching the board. Modern elec-
tronic devices are very sensitive to static electric
charges. Use a grounding wrist strap at all times.
Place all electronic components on a static-dissi-
pative surface or in a static-shielded bag when
they are not in the chassis.
12
Advertisement
Table of Contents
