Zystack Edit Screen - ZyXEL Communications X6004 User Manual
Ip
Hide thumbs
Also See for X6004:
- User manual (582 pages) ,
- Quick start manual (157 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Chapter 22 ZyStack
The following table describes the labels in this screen.
Table 110 ZyStack Add
LABEL
ZyStack Add
Serial
Description
WAN IP
LAN IP
Z_Interface
Failsafe
Add
Cancel
22.2.2 ZyStack Edit Screen
Use this screen to edit the serial number or description of an existing ZyStack member. Click
the Edit icon in the Configuration > ZyStack > Setting screen to view the screen as shown.
Figure 256 ZyStack Edit
The following table describes the labels in this screen.
Table 111 ZyStack Edit
LABEL
Machine ID
Serial
Description
278
DESCRIPTION
Use this section to add an additional member to your ZyStack.
Type the serial number of the X6004 you want to add to the ZyStack. You can get the
serial number by clicking on the edit icon in the Configuration > ZyStack > Setting
screen of an X6004 that is not part of a ZyStack.
Type a description for this ZyStack member.
Type the WAN IP address of the X6004 you want to add to the ZyStack.
Type the LAN IP address of the X6004 you want to add to the ZyStack.
This field is only configurable for the ZyStack master. It displays whether the
interface on the master X6004 is LAN or WAN for the ZyStack.
Select the failsafe mode for this ZyStack. Select Active if you want all the X6004 to
be in operational mode in the ZyStack or Select Standby if you want the X6004 to
act as a back up in case of a failure of a ZyStack member. See
273
for more information.
Click Add to save your changes to the X6004.
Click Cancel to go back to the previous screen without saving your changes.
DESCRIPTION
This field displays the system name of the X6004. The system name is automatically
assigned to the X6004 based on when it was added to the ZyStack. IPPBX_001 is
always the master (or a stand-alone IPPBX) followed by slaves IPPBX_002,
IPPBX_003 and so on.
Type the serial number of the X6004 you want to add to the ZyStack. You can get the
serial number by clicking on the edit icon in the Configuration > ZyStack > Setting
screen of an X6004 that is not part of a ZyStack.
Type a description for this ZyStack member.
Section 22.1 on page
X6004 User's Guide
Advertisement
Chapters
Table of Contents
