The Call Blacklist Screen - ZyXEL Communications X6004 User Manual

Chapter 6 Server

6.7.1 The Call Blacklist Screen

Use this screen to set up a list of phone numbers that are not allowed to call into the X6004.
You can also use the letters N, Z and X to represent numbers you want to block. The letter "N"
represents any digit from 0-9, Z any digit from 1-9 and X any digit from 2-9. For example,
enter 023NNNNNN to block any 9 digit number that starts with 023 from calling the
extensions configured on the X6004.
Furthermore, you can use the period (.) as a wildcard, to block any numbers that begin with a
pattern of digits you specify. For example, enter 555. to block any numbers starting with the
string 555 from calling the extensions configured on the X6004.
To access this screen, click Configuration > PBX > Server Configuration > Server > Call
Block(AA) > Black List.
Figure 119 Configuration > PBX > Server Configuration > Server > Call Block > Black List
Each field is described in the following table.
Table 26 Configuration > PBX > Server Configuration > Server > Call Block > Black List
LABEL
Number
Delete
Apply
Cancel
6.8 The Feature Code Screen
Use this screen to set values for the feature codes the X6004 supports from an X6004's
extension. Users can dial these codes to enable or disable the features listed below for their
extension settings by entering these codes on their phone's keypad. Refer to
page 159
Section 13.3.4 on page
> Feature Code to open the screen as shown.
126
DESCRIPTION
Type the telephone number you want the X6004 to block from calling extensions in
your telephone network. Click Add to place this number in the blacklist. You can
also use the letters N, X and Z to represent numbers and the period "." to include
any number that starts with the digits you specify.
Highlight an existing telephone number in the blacklist and click the Delete icon to
remove this telephone number from the blacklist.
Click this to save your changes.
Click this to go back to the Call Block screen.
for call forward and call block relative settings for each extension (for example,
169). Click Configuration > PBX > Server Configuration > Server
Chapter 13 on
X6004 User's Guide