Configure A Pri Trunk - ZyXEL Communications X6004 User Manual

Each field is described in the following table.
Table 75 Add/Edit PRI Trunk
LABEL
Machine ID
Group Name
Description
Apply
Back to Outbound
Group/Cancel

17.4.1 Configure a PRI Trunk

Use this screen to configure a PRI Trunk. The fields in this screen vary depending on the
application type you select in the Option field. Click the Advanced icon in the PRI Trunk
section of the Outbound Line Group configuration screen to view the screen as shown.
Figure 195 Configure a PRI Trunk - DDI/DID
X6004 User's Guide
DESCRIPTION
Select the ID of the X6004 on which you want to configure the PRI interface. This
is an internal name (not configurable) of the X6004. Only one choice is shown if
you have not configured ZyStack.
This field is not available when editing an PRI configuration.
Type the name of this PRI interface. You can use alpha-numeric and underscore
(_) characters. Spaces are not allowed.
Type the description for this PRI interface. You can use alpha-numeric, hyphen (-)
and underscore (_) characters. Spaces are allowed.
Click Apply to save your changes.
Click this to go to the Outbound Line Group screen without saving your changes.
Chapter 17 Outbound Line Group
211