Assigning An Lcr To An Authority Group - ZyXEL Communications X6004 User Manual

Chapter 3 Tutorials
Figure 64 LCR Example: ISDN_call
3 The Dial Condition screen appears as shown.
• Type 800 followed by a period (.) in the Dial Condition field. This means that this
LCR will be used when callers dial any number that begins with 800. The period (.) is
a wildcard character, meaning anything can follow the 800.
• Test the dial condition. In our example, we test the number 8005555555 to see if it
matches our dial condition. You can test any number by typing it in the Number
Pattern Test field and clicking the Right icon; an
matches the dial condition and an
• Leave the offset value empty. In our example, we do not need to configure the offset
value. See
• Click Apply to save your settings.
Figure 65 Dial Condition for ISDN_call LCR
4 You are done configuring the LCR. However, before it can be used by any of the phones
connected to the X6004, the LCR needs to be assigned to an appropriate authority group.

3.4.3 Assigning an LCR to an Authority Group

The Group Management screen allows you to give an authority group (and the extensions in
that group) the right to use an LCR (outbound dial condition). In our example, we give the
authority group Basic the right to call out using the LCR ISDN_call.
74
X
Figure 62 on page 73 for an example.
O appears, if the number typed in
appears if it does not match the dial condition.
X6004 User's Guide