Add/Edit Fxo Trunk - ZyXEL Communications X6004 User Manual

Chapter 17 Outbound Line Group
Each field is described in the following table.
Table 71 Configuration > PBX > Outbound Line Management > Outbound Line Group
LABEL
FXO Trunk / PRI
Trunk / BRI Trunk
/ SIP Trunk /
Trusted Peer
Machine ID
Group Name
Description
Add, Advanced,
Edit, Delete, Auto
Attendant

17.3 Add/Edit FXO Trunk

The screens for editing or adding FXO trunks on the X6004 contain the same fields. Only the
screen used to add FXO trunks is shown below. Click the Add (or Edit) icon in the FXO
Trunk section of the Outbound Line Group configuration screen to view the screen as
shown.
Figure 191 Add/Edit FXO Trunk
208
DESCRIPTION
These headings divide the screen into sections based on the type of outside line
you have configured:
• FXO Trunk - refers to a connection from the X6004 to the PSTN (your local
telephone company) via the FXO port on the X6004.
• PRI Trunk - refers to a connection from the X6004 to the ISDN T1 or E1 trunk
line via the PRI port on the X6004.
• BRI Trunk - refers to a connection from the X6004 to the basic rate ISDN trunk
line via the BRI port on the X6004.
• SIP Trunk - refers to a connection from the X6004 to a SIP server at your VoIP
service provider.
• Trusted Peer - refers to a connection to another SIP server (for example
another X6004) that has configured your X6004 as a trusted peer.
This field displays the ID of the X6004 on which an outside line is configured.
This field displays the name of an outside line.
This field displays the description for an outside line.
Select from one of the following choices:
• Add - to create a new outbound line group.
• Advanced - to configure the settings of an outbound line group.
• Edit - to change the description of an outbound line group.
• Delete - to remove an existing outbound line group.
• Auto Attendant - to assign an auto attendant to an outbound line group.
X6004 User's Guide