Inactivity Timer - ZyXEL Communications X6004 User Manual

C
H A P T E R
29.1
What You Need to Know About Inactivity Timer
Inactivity Timeout
There is a default system management idle timeout of ten minutes (six hundred seconds)
defined in the Maintenance > Administration > Inactivity Timer screen. The X6004
automatically logs you out if the management session remains idle for longer than this timeout
period. The management session does not time out when a statistics screen is polling.
29.2 The Inactivity Timer Screen
Use this screen to set the maximum time period allowed before an idle session expires. To
access this screen, click Maintenance > Administration > Inactivity Timer.
Figure 284 Maintenance > Administration > Inactivity Timer
Each field is described in the following table.
Table 140 Maintenance > Administration > Inactivity Timer
LABEL
Web configurator

inactivity timer

Apply
Reset
X6004 User's Guide
Inactivity Timer
DESCRIPTION
Type how many minutes a management session (either via the web configurator
or SMT) can be left idle before the session times out. The default is 10 minutes.
After it times out you have to log in with your password again. Very long idle
timeouts may have security risks. A value of "0" means a management session
never times out, no matter how long it has been left idle (not recommended).
Click this to save your changes and to apply them to the X6004.
Click this to set every field in this screen to its last-saved value.
29
325