Troubleshooting - ZyXEL Communications X6004 User Manual

C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• X6004 Access and Login
• Internet Access
• Advanced Features
• Reset the X6004 to Its Factory Defaults
35.1 Power, Hardware Connections, and LEDs
The X6004 does not turn on. None of the LEDs turn on.
1 Make sure the X6004 is turned on.
2 Make sure you are using the power adaptor or cord included with the X6004.
3 Make sure the power adaptor or cord is connected to the X6004 and plugged in to an
appropriate power source. Make sure the power source is turned on.
4 Turn the X6004 off and on.
5 Disconnect and re-connect the power adaptor or cord to the X6004.
6 If the problem continues, contact the vendor.
The ALM LED is on.
1 Turn the X6004 off and on.
2 Disconnect and re-connect the power adaptor to the X6004.
3 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
X6004 User's Guide

Troubleshooting

35
375