Zystack Edit Screen - ZyXEL Communications X6004 User Manual

Hide thumbs Also See for X6004:

Table of Contents

The following table describes the labels in this screen.

Table 134 ZyStack Add

23.2.2 ZyStack Edit Screen

Use this screen to edit the serial number or description of an existing ZyStack

member. Click the Edit icon in the Configuration > ZyStack > Setting screen to

view the screen as shown.

Figure 218 ZyStack Edit

X6004 User's Guide

Type the serial number of the X6004 you want to add to the ZyStack. You

can get the serial number by clicking on the edit icon in the

Configuration > ZyStack > Setting screen of an X6004 that is not part

of a ZyStack.

Type a description for this ZyStack member.

Type the WAN IP address of the X6004 you want to add to the ZyStack.

Type the LAN IP address of the X6004 you want to add to the ZyStack.

This field is only configurable for the ZyStack master. It displays whether

the interface on the master X6004 is LAN or WAN for the ZyStack.

Click Add to save your changes to the X6004.

Click Cancel to go back to the previous screen without saving your

Click Reset to clear the fields and begin configuring anew.

Chapter 23 ZyStack