Configuring The Emergency Call Screen - ZyXEL Communications X6004 User Manual

21.2.1 Configuring the Emergency Call Screen

Use this screen to manage emergency call numbers on the X6004. Click Configuration >
PBX > Call Services > Call Emergency to view the following screen.
Figure 235 Emergency Call Configuration
The following table describes the labels in this screen.
Table 96 Emergency Call Configuration
LABEL
Outbound Line
List
Outbound Line
Pool/Selected
Outbound Line
Edit
Apply
Cancel
Emergency
Numbers
X6004 User's Guide
DESCRIPTION
Use this section to specify which outside line groups should be used for emergency
calls.
Highlight an outside line group in the Outbound Line Pool column and click the
right arrow to select this outside line group for emergency call use.
Highlight an outside line group in the Selected Outbound Line column and click the
left arrow to remove this outside line group from emergency call use.
Highlight an outside channel and click the edit icon to add a prefix which should be
appended to emergency calls when using this outside line.
The prefix is what allows callers to simply dial the well known emergency number for
their region. For example, in the United States the emergency number is 911, so you
want users to simply dial 911 in case of an emergency. Since extensions usually
have to dial a prefix to dial out via the X6004, this might make it confusing for callers
within your organization.
Type the prefix number necessary to connect users to an emergency number by
simply dialing the emergency number you configure in the Emergency Number
section of this screen.
Click this to save your changes and to apply them to the X6004.
Click this to set every field in this screen to its last-saved value.
Use this section to add, edit or remove emergency numbers.
Chapter 21 Call Services
259