The Log Setting Screen - ZyXEL Communications X6004 User Manual
Ip
Hide thumbs
Also See for X6004:
- User manual (582 pages) ,
- Quick start manual (157 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Chapter 25 System Log
Figure 269 Report > LOGS > System Log > View Log: Show Filter
Each field is described in the following table.
Table 125 Report > LOGS > System Log > View Log: Show Filter
LABEL
Display
Keyword
Source Address
Destination
Address
Search
25.3 The Log Setting Screen
The log setting screen lets you view the settings configured for the internal system log and the
remote syslog servers. Use this screen to access the configuration pages for internal and
external log servers. Click Report > Logs > System Log > Log Setting to view the screen as
shown next.
302
DESCRIPTION
Select a category of logs to view; select All Logs to view logs from all of the log
categories that you selected in the Log Setting page. Refer to
page 299
for more information on log categories.
You can filter the logs to only display log entries that match a string you enter in
this field. A string can be a word, a number or a combination of words and
numbers. Type the string you want to search the logs for.
You can filter the logs to only display log entries that are created as a result of
some action originating at a particular IP address. For example, an administrator
logging into the X6004 from a computer with a particular IP address on your
network. Type the IP address you want to search for as the source IP address of
the X6004.
You can filter the logs to only display log entries that are created as a result of
some action terminating at a particular IP address. This is typically the X6004s
LAN or WAN IP address. Type the IP address you want to search for as the
destination IP address of the X6004.
Click Search to show the filtered results of your logs. Only the logs that match the
criteria you specified are displayed.
Section 25.1 on
X6004 User's Guide
Advertisement
Chapters
Table of Contents
