Zystack Edit Screen; Figure 191 Zystack Edit; Table 93 Zystack Add; Table 94 Zystack Edit - ZyXEL Communications IP PBX X6004 User Manual

Ip pbx
Table of Contents

Advertisement

Chapter 23 ZyStack
The following table describes the labels in this screen.

Table 93 ZyStack Add

LABEL
ZyStack Add
Serial
Description
WAN IP
LAN IP
Z_Interface
Failsafe
Add
Cancel

23.2.2 ZyStack Edit Screen

Use this screen to edit the serial number or description of an existing ZyStack member. Click
the Edit icon in the Configuration > ZyStack > Setting screen to view the screen as shown.

Figure 191 ZyStack Edit

The following table describes the labels in this screen.

Table 94 ZyStack Edit

LABEL
Machine ID
Serial
Description
210
DESCRIPTION
Use this section to add an additional member to your ZyStack.
Type the serial number of the X6004 you want to add to the ZyStack. You can get
the serial number by clicking on the edit icon in the Configuration > ZyStack >
Setting screen of an X6004 that is not part of a ZyStack.
Type a description for this ZyStack member.
Type the WAN IP address of the X6004 you want to add to the ZyStack.
Type the LAN IP address of the X6004 you want to add to the ZyStack.
This field is only configurable for the ZyStack master. It displays whether the
interface on the master X6004 is LAN or WAN for the ZyStack.
Select the failsafe mode for this ZyStack. Select Active if you want all the X6004 to
be in operational mode in the ZyStack or Select Standby if you want the X6004 to
act as a back up in case of a failure of a ZyStack member. See
207
for more information.
Click Add to save your changes to the X6004.
Click Cancel to go back to the previous screen without saving your changes.
DESCRIPTION
This field displays the system name of the X6004. The system name is automatically
assigned to the X6004 based on when it was added to the ZyStack. IPPBX_01 is
always the master (or a stand-alone IPPBX) followed by slaves IPPBX_02,
IPPBX_03 and so on.
Type the serial number of the X6004 you want to add to the ZyStack. You can get
the serial number by clicking on the edit icon in the Configuration > ZyStack >
Setting screen of an X6004 that is not part of a ZyStack.
Type a description for this ZyStack member.
Section 23.1 on page
X6004 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

X6004

Table of Contents