Figure 224 Lcr Configuration - ZyXEL Communications X6004 User Manual

Chapter 19 LCR

Figure 224 LCR Configuration

Each field is described in the following table.
Table 92 LCR Configuration
LABEL
LCR Data
LCR Name
Description
Max Call Time
Outbound Line
Group
Apply
Cancel
Dial Condition List
Delete
246
DESCRIPTION
Type a short name to identify this outbound dialing rule (LCR). You can use letters
"a-z", "A-Z", numbers "0-9" and the underscore "_" character. Spaces are not
allowed.
Type a short description for this outbound dialing rule (LCR). You can use printable
ASCII characters; spaces are allowed.
Leave this field blank, if you don't want to limit the duration of outgoing calls that
use this outbound dialing rule (LCR).
Alternatively, enter the number of seconds (1-99999) to which you want to limit the
duration of outgoing calls that use this outbound dialing rule (LCR).
Use this section to add or remove outbound line groups from this outbound dialing
rule (LCR).
• Add an outbound line group to this LCR: Highlight an outbound line group in
the Pool column by clicking on it and then click the Right button to move it to
the Selected column.
• Remove an outbound line group from this LCR: Highlight an outbound line
group in the Selected column by clicking on it and then click the Left button to
move it to the Pool column.
If the LCR contains multiple outbound line groups, you can use the Up and Down
buttons to specify the priority of the outbound line groups.
• Highlight an outbound line group in the Selected column by clicking on it and
then click the Up button to raise its priority.
• Highlight an outbound line group in the Selected column by clicking on it and
then click the Down button to lower its priority.
Click this to save your changes.
Click this to go back to the LCR List screen without saving changes.
Select the dial conditions that you want to remove in the Delete column and then
click the Delete button.
X6004 User's Guide