Chapter 1: Overview; Feature Summary - Xilinx LogiCORE MicroBlaze Product Manual

Overview
The MicroBlaze™ Micro Controller System (MCS) is highly integrated standalone processor
system intended for controller applications. Data and program is stored in a local memory,
debug is facilitated by the MicroBlaze Debug Module, MDM. A standard set of peripherals
is also included, providing basic functionality like interrupt controller, UART, timers and
general purpose input and outputs.
X-Ref Target - Figure 1-1
Optional Feature

Feature Summary

MicroBlaze
The MicroBlaze embedded processor soft core is a reduced instruction set computer (RISC)
optimized for implementation in Xilinx® Field Programmable Gate Arrays (FPGAs). Detailed
information on the MicroBlaze processor can be found in the MicroBlaze Processor
Reference Guide
The MicroBlaze parameters in MicroBlaze MCS are fixed except for the possibility to enable/
disable the debug functionality. The values of all MicroBlaze parameters in MicroBlaze MCS
can be found in
Minimum Area configuration.
MicroBlaze Micro Controller System v1.3
PG048 December 18, 2012
ILMB
Local
Memory Bus
LMB BRAM
Interface Controller
Figure 1-1: MicroBlaze Micro Controller System (MCS)
[Ref 5].
Table 4-2. These values correspond to the MicroBlaze Configuration Wizard
www.xilinx.com
MicroBlaze
DLMB
Local
Memory Bus
LMB BRAM
Interface Controller
Block RAM
(Dual Port)
Chapter 1
MicroBlaze
Debug
I/O Module
5