Table of Contents
Advertisement
A953 HANDY GOT
1.3
Introduction of cables and screen creation software (options) and their
applications
Order the following options in accordance with the connected PLC configuration.
1.3.1
Common options
1) Screen creation software
For the details of versions applicable in the Handy GOT and the
software working environment, refer to 1.5.
- Screen creation system startup software SW D5C-GOTR-
PACKE (V)
"V" at the end of the model name indicates that this software is
for version upgrade.
- Screen creation system startup software SW D5C-GTD2-E
2) Protective sheets F9GT-40PSC (5 sheets in 1 set)
Each of these sheets protects the display unit against dirt when
adhered on the display unit.
1.3.2
Options dedicated to A953 Handy GOT
External cable
• External cable F9GT-HCAB-3M (with a 25-pin D-Sub connector on
one side) (3m, 9' 10")
This cable connects the Handy GOT and an external equipment
(such as communication unit, power supply unit, operation switches
and emergency stop switch).
• External cable F9GT-HCAB1-3M (with untied wires on one side)
(3m, 9' 10")
This cable connects the Handy GOT and an external equipment
(such as communication unit, power supply unit, operation switches
and emergency stop switch).
Use this cable when connecting an external equipment to the PLC
directly or through a relay connector.
PLC connection cable
• Relay cable F9GT-HCAB5-150 (1.5m, 4' 11") for PLC connection
This cable is equipped with the 6-pin MINI DIN connector to directly
connect the Q Series PLC and untied wires to connect the power
supply, the operation switches and the emergency stop switch.
Use this cable together with the external cable F9GT-HCAB-3M
(with 25-pin D-Sub connector).
Introduction 1
F o r 2 5 - p i n
D - S u b
c o n n e c t o r
F o r u n t i e d
w i r e s
T o P L C
F o r p o w e r s u p p l y a n d
o p e r a t i o n s w i t c h e s
1-4
Advertisement
Table of Contents
