Rear Panel - Mitsubishi A953GOT-SBD-M3-H Hardware Manual

A953 HANDY GOT
1.4.2

Rear panel

The name and function of each part of the rear panel of the Handy GOT are described below.
When the rear cover is removed, diversified connectors can be seen.
1 )
1) Hand strap
Is a strap whose length is adjustable to allow the operator to comfortably hold the Handy
GOT.
2) Metal hook for mounting on the wall
Is offered to mount the Handy GOT on the wall for operation and accommodation.
3) External cable (Refer to section 2.2.)
Is offered as an option to connect a PLC (for RS-232C communication), power supply and
operation switches, and connected to the connectors 3)' in two positions.
4) Port for personal computer (9-pin D-Sub, male) (for RS-232C communication) (Refer to
chapter 5.)
Is offered to transfer the screen data created using the screen creation software.
2 )
W h e n t h e r e a r c o v e r i s r e m o v e d ( e n l a r g e d v i e w )
3 ) '
N o t u s e d
Introduction 1
3 ) '
4 )
3 )
1-6