Table of Contents
Advertisement
A953 HANDY GOT
b) Tighten the hexagon nut for mounting of the external cable to the Handy GOT.
Make sure to tighten the hexagon nut for
mounting with a sufficient force to avoid
looseness.
As guideline, tighten it until the packing is
crushed by 0.5mm (0.02") or more.
c) Pull lightly the cable, and tighten lightly the
hexagon nut for tightening in the position in which
the cable is naturally stopped.
d) Tighten securely the hexagon nut for tightening
so tha t the c able will n ot c ome off o r th e
waterproof ability will not be deteriorated.
3) Attach the rear cover.
a) When closing the rear cover, make sure that the packing (D) has not come off.
b) Attach the rear cover.
c) Tighten the four mounting screws.
Make sure that the tightening torque is 0.49 to 0.68 N•m.
Installation Wiring 2
P a c k i n g
H e x a g o n n u t f o r m o u n t i n g
H e x a g o n n u t
f o r t i g h t e n i n g
2 2 m m
( 0 . 8 7 " )
P u l l i n g
d i r e c t i o n
A s g u i d e l i n e , m a k e s u r e
t h a t t h e c l e a r a n c e i s
3 . 5 m m
( 0 . 1 4 " ) o r l e s s .
2-9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Advertisement
Table of Contents
