Table of Contents
Advertisement
A953 HANDY GOT
7.2.2
Setting in GOT
When the GOT is connected to the computer link unit or the serial communication unit for
monitoring, setting is not required on the GOT side in principle.
However, when the AJ71QC24N(-R2) or the A1SJ71QC24N(-R2) is connected and data
transmission at 38,400 bps is required, the transmission speed on the GOT side should be set
to 38,400 bps.
Set the transmission speed in "Setup" of the utility function of the GOT.
For the details of the utility function, refer to the GOT-A900 SERIES OPERATING MANUAL
(EXTENSION FUNCTION/OPTIONAL FUNCTION FOR SW D5C-GOTR-PACKE).
Point
After the system program (such as the basic OS and the communication driver) is installed in
the GOT, then the power of the GOT is turned off once and turned on again, the utility function
can be started up.
After starting up the GOT, touch the "Setup" icon to display the "Setup" screen, then perform
the settings related to computer link connection.
7.3
Transmission specifications
The table below shows the transmission specifications used for communication between the
GOT and the computer link unit or the serial communication unit.
Item
Transmission speed
Data length
Stop bit
Parity bit
Sum check
When QJ71C24(-R2)
is connected
38400bps
QC24 Baud rate
Select the transmission speed to be used
when the QC24N is connected.
(At shipment, it is set to "19200".)
Contents of setting
When AJ71QC24N(-R2) or
A1SJ71QC24N(-R2) is connected
19200bps/38400bps
8 bits
1 bit
Provided (odd)
Provided
Computer Link Connection 7
When any other
unit is connected
19200bps
7-6
Advertisement
Table of Contents
