Creation Of Operation Switch Name Sheet; Creation Of Name Sheet - Mitsubishi A953GOT-SBD-M3-H Hardware Manual

A953 HANDY GOT
3.5

Creation of operation switch name sheet

This section describes how to create the operation switch name sheet.
3.5.1

Creation of name sheet

1) Prepare a mount sheet and an OHP sheet (transparent sheet) offered as accessories.
2) Write arbitrary switch names on the name sheet mount.
The mount is of actual dimensions.
If making another sheet, make it in the following dimensions.
K e y c e n t e r
( p r i n t c e n t e r )
3) When the work in the step 2) is finished, copy the contents of the mount sheet on the OHP
sheet in the actual dimensions (100%) using a copy machine. The OHP sheet is as double
as the mount sheet. If you have made a mistake in copy, use the other half of the OHP
sheet.
If you would like to prepare another OHP sheet, use the following one which can be copied.
Recommended OHP sheet: VF-5 (A4 × 20 sheets) manufactured by KOKUYO
Material: Polyester film
Thickness: 0.1 mm
D i a m e t e r = 1 7 ( 0 . 6 7 " )
: E f f e c t i v e r a n g e f o r c h a r a c t e r s
1 2 2 2 2 2
( 0 . 8 7 " ) ( 0 . 8 7 " )
( 0 . 4 7 " )
9 6 ( 3 . 7 8 " )
S h e e t i n s e r t i o n d i r e c t i o n
2 2 ( 1 8 )
( 0 . 8 7 " )
( 0 . 7 1 " )
Wiring and Handling of Switches 3
U n i t : m m ( i n c h e s )
3-14